FLYLINE SOLAR PHOTOVOLTAIC POWER

Murickens group, an ISO 9001:2015 certified company introduces two registered brand names"MG"and"Flyline"with the intention of saving of power by manufacturing and promoting solar based home appliances and lights that work with the help of high quality power generating solar panels.

1. Flyline Monocrystalline cells :-

Most mono crystalline are silicon wafer which cut in thin slices from most pure silicon cylinder and micro circuits are fabricated on it single crystal silicon. Advantage of mono crystalline - is most efficient and most dependable way to produce electricity from the sun. Comparing to polycrystalline mono is 20 to 30% more efficient, because each module is made from a single silicon crystal and is more efficient than polycrystalline. The silicon crystal used in single cells must be requires a much higher purity level. Mono-crystalline solar panels are first generation solar technology and have long time durability. It produces more electricity per square meter. In Kerala climate 1000 W Solar panels can create between 4.5 Kwh to 5 Kwh electricity per day.

2. Flyline Polycrystalline cells :-

The cost of production of polycrystalline is less than that of mono-crystalline, is very commonly used. Polycrystalline cells are constructed by the method of molten silicon is poured into a cast instead of being made into a single crystal. This material can be synthesized easily by allowing liquid silicon to cool using a seed crystal of the desired crystal structure. High temperature chemical vapor deposition (CVD), is the other methods for crystallizing amorphous silicon to form poly silicon. In this process, silicon pieces are melted in a ceramic crucible and then formed in a graphite mold to form a block of silicon. As the molten silicon is cooling a seed crystal of the desired crystal structure is created for formation. For this process only less silicon is required and thus manufacturing cost is reduced and that is why the efficiency is poor than Monocrystalline. Polycrystalline panels only have an efficiency of 70% to 80% compared with mono-crystalline solar panel.We are using 5 busbar (5BB) cells.

3. Flyline Thin film solar panel :-

These are most advanced flexible model solar panels. We can install it in any curved or plane surface where sunlight is available. Thin film solar panel is more efficient comparing Poly and mono crystalline cells but the main drawback is lifetime is only half time than Poly and mono Crystalline cells.

4. Mono PERC Solar Cells :-

Mono PERC "Passivated Emitter and Rear Contact" solar cells - This type of solar cells are used for the production of solar panels. PERC cells are the modified form of conventional cells. PERC solar cells have an additional layer with the back side of the cell. This layer allows some of the sun�s rays to reflect back into the solar cell, gives them an opportunity to be turned into energy. So that , this cells produce huge amount of energy compared to conventional cells.

5. Half-Cut Solar Cells :-

Half-cut solar cells are cut into halves (two solar panels fixed in a single frame). The top and bottom portions work independently. One portion is active even if the other is shaded. It is applicable when the area has shade. That improves the solar module's performance. They are also known as "twin cells." Robotic technology is used throughout the manufacturing process by the top ten world-class manufacturers. Here, solar modules are cut into two halves. Each half works as a separate unit. I.e., it works independently and each unit will produce separate current. The main advantage of half-cut solar panels is that they reduce manufacturing costs. Let�s see, a half-cut solar panel with 600 W power requires only 2.2 meters of length and 1 meters of width. We can use the full cut of two panels (300 W x 2 = 600 W panel) instead of the 600 W half cut. Each individual unit has 300 W of power, which requires a space of 1.6 meters in length and 1 meters in width for each panel. This requires space near to double compared to the 600 W half- cut single panel. Manufacturers benefit the most from half-cut solar panels because they reduce their manufacturing costs in a frame, glass, and so on. In this way, customers have only one benefit, which is that they save some of their installation space. If there is any damage to the panel, that will affect the customer. All the benefits are to the manufacturers. In practical experience, full- cut small-wattage solar panels are very useful and more efficient compared to half-cut solar panels. But in the future, the market availability of solar panels will be in the form of half cuts. Muricken's solar products have various top-level international quality certifications and awards. We also use highly efficient solar panels.

What is the benefit of half-cut cell solar panels�?

� Half-cut solar cells are more useful to the manufacturers. It reduces a lot of risk factors, like cell breakage during the manufacturing time.
� This reduces manpower, maintenance, and fabrication costs.
� One portion is active even if the other half is shaded.
� It not only cuts the cells in half but also reduces them overall manufacturing costs.
� Panel rates are calculated as per watts. It helps manufacturers to produce high capacity panels that can be accommodated in a limited space.
� On the customer side, the main benefit is to save installation space slightly.

FEATURES OF SOLAR CELLS :-

*. High quality solar Photovoltaic Silicon Mono / Multi crystalline panels or Cell . *.German cells assures the quality of product.*. It is union of solar cells for desired capacity.*. Light weight and designed for getting maximum utilization.*. Resistant to abrasion, hail impact, rain, water and environmental factors.*. Anodized aluminum frame and pre-drilled mounting holes.*. Tempered glass for rugged protection.*. IEC 61215 certification by Euro Test and TUV.*. 5 years warranty.10. ISO 9001- 2008 certified.

Different wattage panel is available like 25W, 50W, 100W, 125W, 275W, 315W, 335W, 345W, 390W, 420W and 540W

SOLAR PANEL TECHNICAL SPECIFICATION:-