Murickens group, an ISO 9001:2015 certified company introduces two registered brand names "MG" and "Flyline" with the intention of saving of power by manufacturing and promoting solar based home appliances and lights that work with the help of high quality power generating solar panels.


Flyline Solar Hybrid Inverter is the best option for homes because it can be used both in solar as well as KSEB power as it is a charging source as per our convenience. When there is a power failure solar hybrid inverter can take up the load of all the appliances used at home and when there is sufficient sunlight after battery charging the hybrid inverter automatically cut the KSEB line and drive from the panels directly. In the absence of sunlight it charges the battery from main power supply but only if we manually switch on the charging. We have made a reputation the field of solar based power since our induction in 2000 and have done thousands of solar power unit installations in many parts of the country including Kerala Agriculture Research University, Malappuram, The CISF 7th battalion military camp , Hyderabad, International Airport, Karipoor, Kerala, Govt. of India, Dept. Of Space Sreeharikotta, Central Marine Fisheries Research Institute,Cochin, Vallarpadam Container Terminal (IGTPL) etc in addition to many other private concerns. It is most important that the installation should be undertaken by a well experienced and qualified technician to get 100% out put of the system and to avoid unnecessary expenses and unpleasant situations.



* Flyline pure sine wave solar system is a solar charged automatic inverter that can be used for lighting up a house as well as powering computers and other electronic equipments that need uninterrupted power supply.* Separate mains on /off charger switch.* Works with the power of solar power/AC power (KSEB line), the best way to save money and nation by using natural resource.* Provision for connecting KSEB current and solar power.* Attractive Designs.* Pollution free type.* Single Switch Operation.* DSP based very low component cost design.* Single sided PCB, easy to assemble without any SMD components* Auto resetting.* Protection from lightening, high/Low Voltage Trip.* Over Load Protection.* Over Charge and Deep Discharge cut off.* Independent Digital display for Solar or KSEB charging voltage, main voltage, inverter voltage, load etc* Solar charger LCD display-panel voltage , battery voltage, out current, solar in use, direct mains, saved unit - only 36 and above volt system.* Audio and Visual Indicators.* Can be connected to the existing wiring.* Bridge type center aligned switching MOSFET based topology.* No husking sound.* It is a fully automatic built-in charging control system, no need of any manpower.* The Special feature of the system is, when the battery is full and there is sufficient sunlight the system will automatically cut the main line off (KSEB Line) and connect the solar system. This feature is applicable only if you use the recommended capacity of solar panel and solar inverter* The main advantage of our built in solar charger is floating type and once it fully charges the battery, it gone to trickle charging. This will provide more battery life and can utilize 100 % efficiency of solar panel power.* The first preference is for solar charging and when the battery is low and there is no sufficient sunlight, there is an option for manual or automatic grid charging through separate switch.* ISO: 9001 -2008 Certified solar power conditioner.*An ideal unit for part time power supply with low investment.


System priority Stage : - solar-battery-grid

1) When solar energy is sufficient total out put load will operate on solar Inverter. Excess solar power will charge batteries.2) When solar energy is weak then inverter will take DC source from batteries to compensate the out put load3) When the battery discharge level reaches 11.2 volt or below, the out put load is shifted to grid and the battries are charged with the help of solar power only.4) At Day time when each battery becomes 13.5 v the output load again shift to solar Inverter. 5) In 48 and above DC volt system of solar inverter - At night or when there is no sunlight the batteries reach 70% discharge level (30 % kept as a buffer) the out put load is shifted to grid without any change over time. (Each battery discharging level become 1.5 v )6) In 12 and 24 volt DC system of solar inverter - At night or when there is no sunlight, the out put load is shifted to grid and the battery back-up is used only when there is a grid failure.7) After shifting the load to grid there is an optional on off switch ( manual ) to charge the battery from grid up to 13.5 volt .8) At night During changeover of load from battery backup to grid supply (i.e 70 % battery discharged) and if grid supply is absent then load is shifted to solar inverter to use buffer battery backup (i.e balance 30 %)9) By using solar power the solar charger high cut-off is 14.5 V of each battery.


Parameter Single Phase Unit
1 Rating 650 VA to 5000 V A
2 Input Voltage Range 180V-270 AC or Solar power 12,24,36 or 48V
3 Normal Output Voltage 230V AC
4 Output Frequency 50 Hz ± 1 %
5 Input Frequency 45 - 55
6 Power Factor -0.8 Lagging to unit
7 Efficiency 95%
8 Control Digital/Analogue
9 Winding Copper Wires
10 Wave Form Pure Sine Wave
11 Mounting Free Free
12 Compact in size, Can work on Generators
13 Charging - AC or Solar Power Floating type & Trickle charging.
14 Noise Low Noise <50db
15 Battery 12, 24 or 48 V
16 Heat < 40° C

Flyline Solar Hybrid Inverter Details-:Click Here

Watts of some electronic products we use :- Click Here


Flyline Solar power plant installation video of MG Marketing System:-  Click Here

Murickens GOVT clients list :-  Click Here

Murickes Brouchure :- Click Here

For quick response & order-call ( 91) 09400464444,  09447366779, 08281848484